Features of Huan Smart Mini Laboratory Water Purification System

The Huan Smart Mini is a compact system intended for laboratories that need ultrapure water in relatively small, frequent volumes, such as HPLC and other instrumental analyses.

Key Features

Combines tap-water pretreatment, reverse osmosis and ultrapure-water polishing in one unit.
Integrated 6 L internal water tank.
Class III productivity is listed at 30 L/h; Class I resistivity is listed at 18.2 MΩ·cm at 25°C.
Manual and automatic dispensing options are listed in the brochure.

Typical Applications

Laboratory analytical workflows where water is collected in smaller volumes throughout the day and freshness of ultrapure water is important.

Selection Notes

Confirm feed-water quality and required microbial specifications before selecting optional UV or other purification modules. The brochure lists endotoxin and RNase/DNase as N/A for this model.

Frequently Asked Questions

Does the Smart Mini have a built-in water tank?

Yes. The Smart Mini configuration listed in the brochure includes a 6 L internal water tank.

What is the listed purified-water capacity of Smart Mini?

The brochure lists 30 L/h for Type III purified water. Type I ultrapure-water output is specified by water quality rather than a separate production rate.

Reviews

There are no reviews yet.

Be the first to review “Huan Smart Mini Compact Laboratory Water Purification System”

Huan Smart Mini – Specifications

Feature	Smart Mini
Internal storage tank	6 L
Water-quality outputs	Class III purified water and Class I ultrapure water
Class III productivity	30 L/h
Manual dispensing flow	1.2–1.5 L/min
Automatic dispensing volume	100–60,000 mL

Technical Specifications

Parameter	Specification
Feed water source	Tap water
Feed-water conductivity	< 2,000 µS/cm
Feed-water hardness	< 450 ppm as CaCO₃
Feed pressure	0.05–0.5 MPa (7–72 psi)
Feed-water temperature	5–40°C
Class III ionic rejection	> 95%
Class III bacterial rejection	> 99%
Class III conductivity	1–20 µS/cm; 5 µS/cm listed for RO-2
Class I resistivity at 25°C	18.2 MΩ·cm
Class I conductivity at 25°C	0.055 µS/cm
Class I TOC	1–5 ppb*
Class I particles (≥ 0.02 µm)	< 1 particle/mL
Class I bacteria	< 0.1 CFU/mL
Endotoxin / RNase-DNase	N/A in the brochure table
Electrical supply	110/220 V ±10%; 50/60 Hz
Main unit net weight	32 kg
Main unit dimensions (W × D × H)	315 × 525 × 570 mm
Shipping weight	45 kg
Shipping dimensions	525 × 610 × 770 mm

* TOC performance requires the dual-wavelength UV module; the brochure recommends feed-water TOC below 30 ppb. If feed-water conductivity exceeds 1,000 µS/cm, strengthened pretreatment and RO-2 are recommended. If hardness exceeds 450 ppm as CaCO₃, a 0.5T water softener is recommended.

Care all About Life